hebei feixiang roll forming machinery co,ltd;
hebei feixiang roll forming machinery co,ltd
Add to Cart
Fully Automatic C U Channel Roll Forming Machine With 10 - 12m/Min Speed
1. Fully Automatic Cold Steel Strip Profile C U Purlin Roll Forming Machinery
2. high precise and run throughly
3. reliable quality with CE,BV,ISO certification
4. professional service and engineer
5. good reputation and trustable
Product photo :
Model:C&U Type
| decoiler (manual/automatic) | Weight Capacity | 3T |
| Inner Diameter | 450-550mm | |
| Outside Diameter | 1250mm | |
| Coil width | Max 600mm | |
|
Feeding and straightening device |
Pinch rollers | one pair, up and down |
| Straightening rollers | up three, down four | |
| Diameter of rollers | 80 mm | |
| Roll Former | Frame type | single station |
| Forming Roller stand | about 12Groups | |
| Shaft material | First grade 45# steel, | |
| Shaft diameter | 80mm | |
| Roller material | GCr15 | |
| Drive Type | Chain of transmission | |
| Motor |
15KW reducer with frequency control |
|
| Roll stand type |
split type, two sides forming separately |
|
| Size changing time | 8-12 | |
| Automatic size changed by slide screw and angle gear which guarantee the complete synchronization and the material thickness is adjusted by eccentric distance of passive rollers. | ||
| Punching | Type | Hydraulic |
| Mould material | Cr12 | |
| Holes distance | Can be adjusted | |
|
Cutting A: Hydraulic cutter |
Type | After-cutting, hydraulic |
| Material of mould | Cr12 | |
| Cutting tolerance | 10M+/- 2.0 mm | |
|
Cutting B: Fly saw |
option | |
| PLC system | PLC | PANASONIC/Taida/Sanjing |
| Length Controller | Encoder | |
| Operation | Touch Screen/Button | |
| Transducer | Mitsubishi | |
| Hydraulic station | Power | 7.5 KW |
| Hydraulic pressure | 11 Mpa | |
| Runout Table | Non-power type |
|
All technical parameters can be changed,according to user's need.
Thanks very much for your time, welcome to contactUs, we are with you within 24 hours.
We want to know following information.
1), What is the exact profile you want to produce?
2), What kind of material you will use, such as steel or aluminium, max coil weight, thickness?
3), What kind of decoiler and stacker you need?
Pls contact us as below informaiton,hope can cooperate,thanks advance