hebei feixiang roll forming machinery co,ltd;
hebei feixiang roll forming machinery co,ltd
Add to Cart
200 Ton CNC Hydraulic Punching Press Machine with Die Cushion
Provide Customized Personalized Service
| Name | Unit | FX-200 | FX-260 | FX-315 | |||
| Model | Ton | V | H | V | H | V | H |
| Capacity | Ton | 200 | 260 | 315 | |||
| Rated Tonnage point | mm | 6 | 3 | 6 | 3 | 7 | 3.5 |
| Speed Change | s.p.m | 20-50 | 50-70 | 20-50 | 50-70 | 20-35 | 35-50 |
| Stable Speed | s.p.m | 35 | 30 | 30 | |||
| Stroke | mm | 200 | 100 | 200 | 100 | 250 | 150 |
| Die Height | mm | 460 | 510 | 460 | 550 | 500 | 550 |
| Slide Adjustment | mm | 110 | 120 | 120 | |||
| Slide Area | mm | 850x550x90 | 850x630x90 | 950x700x100 | |||
| Bolster Area | mm | 1350x820x140 | 1400x820x160 | 1600x900x200 | |||
| Shank Hole | mm | 65 | 65 | 65 | |||
| Main Motor | kw.p | 18x4 | 22x4 | 30x4 | |||
| Slide Adjust Device | HP | ||||||
| Air Pressure | kg/cm2 | 6 | 6 | 6 | |||
| Presses Precision | Ton | GB(JIS)1 class | GB(JIS)1 class | GB(JIS)1 class | |||
| Presses Dimension | mm | 2420x1490x3612 | 2735x1780x4070 | 2845x1950x4500 | |||
| Presses Weight | Tons | 16 | 22 | 33 | |||
| Die Cushion Capacity | Ton | 10 | 14 | 14 | |||
| Stroke | mm | 80 | 100 | 100 | |||
200ton CNC Punching Press Machine 200ton with Die Cushion
Product Features :
* With high rigidity rack design, they are welded with the use of high- quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
* Consistent driving center and machine center to guarantee accurate and stable punching.
* In order to guarantee relative stationarity of machine operation, it is necessary to equip with two balancers.
* Moulding-adjustment precision is as high as 0.1mm, safe, speedy, and reliable.
* Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
* Adopt highly sensitive and reliable clutch/brake and internationally top duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
* Machine’s structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
* Possess advanced design concepts, low noise, low consumption, and energy saving.
Standard configuration :
* Inverter
* Hydraulic over-load protector
* Slide adjuster (60Tons and below)
* Slide adjust device (80Tons and above)
* Die height indicator (60Tons and below)
* Die height indicator (60Tons and above)
* Balance device
* Rotary cam switch
* Misfeed detection consent
* Power supply
* Crank angle indicator
* Electrical stroke counter
* Air source connector
* Against over-run safety device
* Air ejector
* Maintenance tool box
* Operation manual
Optional Configuration :
* High performance wet clutch & brake
* Electrical automatic lubrication system
* Pneumatic die cushion device
* Foot switch
* Quick die change device (die lifter, clamp and die arm sepjes)
* Slide knock-out device
* Anti-vibration press mount
* Photo-electronic safety device
* Feeder
* Uncoiler
* Leveler
* Mechanism hand
* Die room light
* Touch pad (preset total counter)
* PAC 100 counter system
* Human-computer control system
